Original XT-IDE Compatibility Notes
Jump to navigation
Jump to search
Compatibility notes for Vintage-Computer XT-IDE Board.
Original Version
This table is reproduced from the Vintage-Computer.com wiki.
| Drive MFG | Model | Capacity | Test Machine | XTIDE BIOS | Master/ Slave/ CS | Cable Type | Tester | OS | Tests run |
|---|---|---|---|---|---|---|---|---|---|
| Conner | CFA850A | 813MB | zenith 8088/486 | 009 | Master | 80 pin | Hargle | MS DOS 6.22 | Fdisk, format, boot, basic usage |
| Conner | CFS210A | 210MB | Amstrad PC 2086, XT 8MHz | 1.1.4 | Master | 40 pin | DavideG | MS DOS 5.0 | Formatted under Ms-Dos 5.00. It's recognized by bios and works, but I was not able to complete the startup sequence due to serious defects on last disk sectors. But I'm sure it's compatible since it's similar to the CP3201G. |
| Conner | CFS1081A | 1GB | Leading Edge DC-2011 | 1.1.5 | Master | 40 pin | RWIndiana | MS DOS 6.22 | Fdisk, Format, boot, basic use |
| Conner | CP30061 | 60MB | Leading Edge DC-2011 | 1.1.5 | Master | 40 pin | RWIndiana | MS DOS 6.22 | Fdisk, format, boot, basic usage |
| Conner | CP3201G | 210MB | Amstrad PC 2086, XT 8MHz | 1.1.4 | Master | 40 pin | DavideG | MS DOS 6.22 | Boots and Works. (dos already pre loaded) |
| Fujitsu | MPF3204AT | 30GB | zenith 8088/486 | 009 | Master | 80 pin | Hargle | MS DOS 6.22 | IDentification parameter check only |
| Fujitsu | M2681TAM | 270MB | Amstrad PC 2086, XT 8MHz | 1.1.4 | Master | 40 pin | DavideG | MS DOS 5.0 | Formatted under Ms-Dos 5.00. Boots and Works. |
| IBM | DJAA-31700 | 1.7GB | PC XT 5160 | 009 | Master | 80 pin | MBBrutman | IBM DOS 5 | Fdisk, format, boot, basic usage |
| IBM | DTTA-351680 | 16.8GB | PC XT 5160 | 009 | Master | 80 pin | MBBrutman | IBM DOS 5 | Fdisk, format, boot, basic usage |
| IBM | IC35L040- AVVA07-0 | 40.0GB | PC XT 5160 | 009 | Master | 80 pin | MBBrutman | IBM DOS 5 | Fdisk, format, boot, basic usage |
| Maxtor | 7L250RO | 250GB | zenith 8088/486 | 009 | Master | 80 pin | Hargle | MS DOS 6.22 | IDentification parameter check only |
| Maxtor | DiamondMax 9 6Y080L0 | 80.0GB | PC AT 5170 | 1.1.4 | Master | 40 pin | snq | MS DOS 6.22 | Fdisk, format, boot, basic usage |
| Maxtor | 90644D3 | 6.4GB | PC XT 5160 | 009 | Master | 80 pin | MBBrutman | IBM DOS 5 | Fdisk, format, boot, basic usage |
| Maxtor | 52049H4 | 20.0GB | PC XT 5160 | 009 | Master | 80 pin | MBBrutman | IBM DOS 5 | Fdisk, format, boot, basic usage |
| Maxtor | 5T030H3 | 30.0GB | PC XT 5160 | 009 | Master | 80 pin | MBBrutman | IBM DOS 5 | Fdisk, format, boot, basic usage |
| Quantum | Fireball SE | 4.2GB | PC XT 5160 | 009 | Master | 80 pin | MBBrutman | IBM DOS 5 | Fdisk, format, boot, basic usage |
| Quantum | Fireball 640AT | 640MB | Amstrad PC 2086, XT 8MHz | 1.1.4 | Master | 40 pin | DavideG | MS DOS 5.0 | Ms-Dos 5.00 pre-loaded. Boots and Works. |
| Quantum | Fireball LCT 08 | 8.4Gb (CHS 16383-16-63) | Amstrad PC 2086, XT 8MHz | 1.1.4 | Master | 40 pin | DavideG | MS DOS 5.0 | Ms-Dos 5.00 pre-loaded. Boots and Works. |
| Quantum | ProDrive ELS 127AT | 127MB | IBM PC 5150, Leading Edge DC-2011 | 1.1.5 | Master | 40 pin | RWIndiana | MS DOS 6.22 | FDISK, format, boot, basic use |
| Quantum | ProDrive LPS 52AT | 52MB | IBM PC 5150, Leading Edge DC-2011 | 1.1.5 | Master | 40 pin | RWIndiana | MS DOS 6.22 | FDISK, format, boot, loaded and ran programs fine |
| Samsung | SV0432A | 4.3 Gb | Amstrad PC 2086, XT 8MHz | 1.1.4 | Master | 40 pin | DavideG | MS DOS 5.00 | Fdisk, format, boot, basic usage |
| Samsung | SV0644A | 6.4 Gb | Amstrad PC 2086, XT 8MHz | 1.1.4 | Master | 40 pin | DavideG | MS DOS 5.00 | Fdisk, format, boot, basic usage |
| Samsung | SV2042H | 20 Gb | Amstrad PC 2086, XT 8MHz | 1.1.4 | Master | 40 pin | DavideG | MS DOS 5.00 | Fdisk, format, boot, basic usage (8.4G maximum size of course) |
| Seagate | ST3250823A | 250GB | zenith 8088/486 | 009 | Master | 80 pin | Hargle | MS DOS 6.22 | IDentification parameter check only |
| Seagate | ST310014ACE | 10G | zenith 8088/486 | 1.1.4 | Master | 40 pin | Hargle | MS DOS 6.22 | Fdisk, format, boot, basic usage |
| Seagate | ST32122A | 2012MB | zenith 8088/486 | 009 | Master | 80 pin | Hargle | MS DOS 6.22 | Fdisk, format, boot, basic usage |
| Seagate | ST33232A | 3227MB | PC XT 5160 | 009 | Master | 80 pin | MBBrutman | IBM DOS 5 | Fdisk, format, boot, basic usage |
| Seagate | ST310212A | 10.2GB | JUKO XT 12MHz | 011 | Master | 80 pin | LLE | MS DOS 6.22 | Fdisk, format, boot, basic usage |
| Seagate | ST38410A | 8.4G | Amstrad PC 2086, XT 8MHz | 1.1.4 | Master | 40 pin | DavideG | MS DOS 5.00 | Fdisk, format, boot, basic usage |
| Seagate | ST38420A | 8.6G | Amstrad PC 2086, XT 8MHz | 1.1.4 | Master | 40 pin | DavideG | MS DOS 5.00 | Fdisk, format, boot, basic usage, but wrongly seen by Bios as 4GB (if automatic mode is selected). The disk is correctly formatted if I manually force the disks parameters (CHS 16383, 16, 63) in the XTIDE Bios. |
| Seagate | ST3491A | 420MB | Amstrad PC 2086, XT 8MHz | 1.1.4 | Master | 40 pin | DavideG | MS DOS 5.00 | Fdisk, format, boot, basic usage |
| Western Digital | Caviar 22500 | 2559.8MB | PC XT 5160 | 009 | Master | 80 pin | MBBrutman | IBM DOS 5 | Fdisk, format, boot, basic usage |
| Western Digital | WD200 | 20.0GB | PC XT 5160 | 009 | Master | 80 pin | MBBrutman | IBM DOS 5 | Fdisk, format, boot, basic usage |
| Western Digital | WD400 | 40.0GB | PC XT 5160 | 009 | Master | 80 pin | MBBrutman | IBM DOS 5 | Fdisk, format, boot, basic usage |
| Western Digitial | Caviar 2120 | 125MB | Leading Edge DC-2011, IBM PC 5150 | 1.1.5 | Master | 40 pin | RWIndiana | MS DOS 6.22 | Fdisk, format, boot, basic usage |
| Western Digitial | Caviar 21200 | 1222MB | zenith 8088/486 | 009 | Master | 80 pin | Hargle | MS DOS 6.22 | Fdisk, format, boot, basic usage |
| Western Digitial | Caviar 21000 | 1033MB | zenith 8088/486 | 009 | Master | 80 pin | Hargle | MS DOS 6.22 | Fdisk, format, boot, basic usage |
| Western Digital | WD80EB | 7632MB | zenith 8088/486 | 009 | Master | 80 pin | Hargle | MS DOS 6.22 | Booted. Already fdisk and formatted elsewhere. |
| Western Digitial | 2500JB-00READ | 250GB | zenith 8088/486 | 009 | Master | 80 pin | Hargle | MS DOS 6.22 | IDentification parameter check only |
| Western Digital | Caviar 1210 | 210MB | Amstrad PC 2086, XT 8MHz | 1.1.4 | Master | 40 pin | DavideG | MS DOS 6.22 | Ms-Dos 6.22 pre-loaded. Boots and Works. |
| Quantum | LPS170A | 170MB | IBM PC 5150 (late model) | 1.1.4 | Master | 40 pin | Jorg | PC DOS 3.3, DR DOS 7.03 | boots and works |
| Samsung | SV1203N | 120GB | IBM PC 5150 (late model) | 1.1.4 | Master | 40 pin | Jorg | PC DOS 3.3, DR DOS 7.03 | Works, sees 8.4 GB |
| IBM | DMCA-21440 (2.5 inch) | 1.3GB | IBM PC 5150 | 1.1.5 | Master | 80 wire | Holmes | MS-DOS 5.0 | FDISK, FORMAT, boot, and general use |
| Apacer | Photo Steno Pro II (100x) CF | 256MB | Tandy 1000SX | 011 | Master | 80 pin | aitotat | Tandy DOS 3.2 | Fdisk, format, boot, basic usage |
| Apacer | Photo Steno Pro III (88x) CF | 512MB | Tandy 1000SX | 011 | Master | 80 pin | aitotat | Tandy DOS 3.2 | [b]Only works with 256MB partition (or smaller, likely)[/b]. Fdisk, format, boot, basic usage |
| Sandisk | SDCFB-32 CF | 32MB | XT clone | v1.1.0 | Master | 40 pin | modem7 | MS DOS 6.22 | Fdisk, format, boot, basic usage |
| Sandisk | SDCFB-128 CF | 128MB | zenith 8088/486 | 009 | Master | 80 pin | Hargle | MS DOS 6.22 | Fdisk, format, boot, basic usage |
| Sandisk | SDCFX-1024 CF | 1G | 486 | 011 | Slave | 40 pin | Hargle | MS DOS 6.22 | basic usage |
| Sandisk | SDCFX-1024 CF | 1G | zenith 8088/486 | 009 | Master | 80 pin | Hargle | MS DOS 6.22 | Fdisk, format, boot, basic usage |
| Sandisk | SDSDB-1024 BXP | 1GB | IBM 5155 | 1.1.5 | Master | 80 pin | ewige | PC DOS 3.3 | Fdisk, format, boot, gaming |
| IBM | DTLA-305020 | 15.0GB | PC XT 5160 | 009 | Master | 80 pin | MBBrutman | IBM DOS 5 | IDs to card but can not FDISK or read using DEBUG; is known good |
| Apacer | CF (no speed rating) | 64MB | Tandy 1000SX | 011 | Master | 80 pin | aitotat | Tandy DOS 3.2 | format froze at cylinder 488 and head 2 |
| Toshiba | MK6014MAP | 6007MB | 486DX-2/PIII-500 | Any | Master | 40/80 pin | Lutiana | MS DOS 6.22 | Card does not detect the correctly. DOS is unable to do anything with it. is known to be good. |
| Western Digital | Caviar 14300 | 4.3G | Amstrad PC 2086, XT 8MHz | 1.1.4 | Master | 40 pin | DavideG | MS DOS 6.22 | It's not recognized by XT-IDE Bios: it says "not found". |
| Seagate | ST31276A | 1.3GB | Amstrad PC 2086, XT 8MHz | 1.1.4 | Master | 40 pin | DavideG | MS DOS 5.00 | Disk can be partitioned and formatted by Ms-Dos 5.00, but it doesn't boot. System locks up at the boot or strange random characters appear. |
| Maxtor | 84320D4 | 4.3GB | IBM PC 5150, Leading Edge DC-2011 | 1.1.5 | Master | 40 pin | RWIndiana | MS DOS 6.22 | FDISK, format seem to work. System freezes at boot attempt or begins boot (showing "Starting MS-DOS"), random characters may appear or screen blanks, system reboots or behaves randomly. not recognized after failed read attempt and warm reboot. Known working. Files written with XTIDE can be read on other systems. |
| Maxtor | 90432D2 | 4.3GB | IBM PC 5150, Leading Edge DC-2011 | 1.1.5 | Master | 40 pin | RWIndiana | MS DOS 6.22 | FDISK, format seem to work. System freezes at boot attempt or begins boot (showing "Starting MS-DOS"), random characters may appear or screen blanks, system reboots or behaves randomly. not recognized after failed read attempt and warm reboot. Known working. Files written with XTIDE can be read on other systems. |
| Seagate | ST2383A 94244-383 | 339.0MB | PC XT 5160 | RC1 Trying RC2 | Master | 40 pin | K2x4b524[ | MS DOS 5 and 6.21 | Ideally Fdisk, format, boot, basic usage, however keeps saying missing command interpreter. |
| Fujitsu | MPC3032AT | 3.2G | Amstrad PC 2086, XT 8MHz | 1.1.4 | Master | 40 pin | DavideG | MS DOS 5.0 | Always recognized as Slave, even if I set the jumpers to the Master mode. The disk was sold as a 2G even though it specs out at 3.2G |