XT-CF-lite rev.2

From Lo-tech Wiki
Revision as of 19:31, 12 July 2022 by James (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Lo-tech XT-CF-lite rev.2, Assembled

The lo-tech XT-CF-lite rev.2 is an 8-bit ISA CompactFlash adapter, providing bootable solid-state storage for any IBM compatible PC, including the original IBM Personal Computer 5150. The board supersedes the XT-CF-lite rev.1.

The CompactFlash card is accessible through a custom-made, 3D printed ISA expansion slot bracket, so it can be exchanged without opening the PC. The slot bracket includes CompactFlash specification guide rails for easy insertion and has a cutout to accommodate both Type I and Type II cards.

The board is based on SOIC 74xx series logic and utilises the 3M N7E50-Q516xx-50 CompactFlash socket, and has been tested with both CompactFlash cards and the Seagate ST1 microdrive.

The board is powered by the XT-IDE Universal BIOS, provided through an in-system re-programmable 32KB (addressible) flash-based ROM. Since the BIOS is only 8KB, 24KB is available for other purposes, and is byte-programmable.

This PCB is available now in the the TexElec Store.

Specifications

  • Bootable 8-bit ISA Storage Adapter with header for single type I or type II CompactFlash or Microdrive media
  • Provides fast, fixed-disk storage for 8-bit ISA slot equipped IBM compatible PCs
  • Low power consumption and no external power connection required
  • IBM Personal Computer XT System Board Slot 8 compatible
  • Header for external device activity LED (12mA)
  • Low-cost flash memory chip for boot ROM, 32KB usable (24KB available once boot ROM is installed)
  • Configurable ROM base address - C800h or D800h
  • Configurable IO Port base address - 300h or 320h (change require BIOS flash)
  • Port-mapped IO; supports both 8- and 16-bit instructions (via partial address decoding)
  • Utilises XT-IDE Universal BIOS (adapter type: 'XT-CF')

Design

Use of this design is provided subject to the lo-tech.co.uk Terms and Conditions. The design is Copyright (c) 2014 Peacon Ltd.


For general help with this kit, please see the XT-CF-lite FAQ.

Bill of Materials

Part Value Package Qty Farnell Mouser Digikey
C1..6 0.1uF C-EUC0603 C0603 6 1414610 963-UMK107BJ104KAHT
C7 1uF C-EUC0805 C0805 1 581-0805YD105K
C8 22uF CPOL-EUE2-5 E2-5 1 647-UVR1C220MDD1TD
CF1 N7E50-Q516xx-50 N7E50-Q516xx-50 1 1267444 517-N7E50-Q516B-50-W 3M5456CT-ND
JP1 PINHD-2X04_2.54-S 2X04-S 1 571-5-146256-4
IC1, IC2 74HCT688DW SO20W 2 1085321 771-74HCT688D-T
IC3 SN74LS33D SOIC-14 1 1752958 595-SN74LS33D
IC4 74ACT245DW SO20W 1 595-SN74ACT245DWR
IC5 74HCT139D SOIC-16 1 595-SN74HCT139DR
IC6 SST39SF0x0A DIP32 1 1896595 804-39SF010A7CPHE
R1 270R R-EU_R0603 R0603 1 71-CRCW0603-270-E3
RN1, RN2 RESISTOR NETWORK, 10K, ± 2% 1206 2 1770137 652-CAY16-103J4LF
Socket DIL32 1 1654375 517-4832-6000-CP
  • Board design permits the use of a range of DIP-32 flash chips or 1, 2 or 4Mb:
  • Regardless of the chip used, the first 32KB only will be mapped into the PC address space
  • Base address configuration per JP1

Logic

The board logic provides three distinct functions:

  1. ROM Function:
    • IC2 matches the address bus to the selected base address
    • JP1 position 3 being closed, the select signal is fed to the flash-ROM IC6
  2. CompactFlash interface via IC1, IC4 and IC5
    • IC1 matches the address bus to the selected base address
    • IC4 provides the data bus buffering, to ensure strong signal is driven onto the ISA bus
    • IC5 provides CS0 and CS1 generation based on A4 (alternate status register is at Base+10h) and Reset signal
  3. Slot-8 Card Select Signal and activity LED drive are generated by IC3
    • R1, RN2 and IC3 can be left unpopulated if slot-8 function and activity LED are not required

BIOS Flashing (Programming)

Note: The late initialisation module in the XTIDE Universal BIOS should only be included in the BIOS build for systems that require this. The module can cause the BIOS to hang after initialisation on other systems. The BIOS build above excludes this module.

To program the board, make a DOS boot disk (utilities have been tested on MS-DOS 2.11, 3.3 and 6.22) and add the BIOS binary file and the flash utility. Install the Lo-tech ISA CompactFlash Adapter in the machine and boot from the floppy, then flash the ROM thus (assuming JP1 position 1 is closed, so setting the ROM base address to C800h):

A:\>flash ide_xt.bin c800 

Note that should a board containing the IDE_XTP.BIN image be moved to an Intel 8088/8086 PC, the BIOS image will cause the machine to hang during the POST. To resolve this, either re-flash the board with the IDE_XT.BIN image before moving, or disable the ROM during the POST by opening JP1 position 3. JP1 position 3 can be closed once the machine has booted, so enabling the ROM for programming (provided there is no other ROM at the selected address).

ISA Bracket

Uses Lo-tech ISA Slot Bracket Type 2.

Board Configuration

XT-CF-lite-rev2-JP1.png

JP1 provides the ROM and IO port base address selection, ROM enable, and LED output.

Position (per silkscreen) Function Open Closed
1 ROM Base Address D800h C800h
2 IO Port Base Address 320h 300h
3 ROM Function Disabled Enabled
4 Activity LED - -

Default settings are ROM enabled, IO port 300h and ROM base address C800h.

Note that the IO base address is set within the XTIDE Universal BIOS ROM image via the Universal BIOS Configuration and Flashing utility. The IO address set within that utility must match that configured on the card via the DIP switches. Should the IO port address be changed for any reason, the BIOS must be updated and re-flashed (using the lo-tech XT-CF flash utility).

Device activity LED output is provided at JP1 position 4. Do not short the output. Observe polarity ('+' side is noted on board silkscreen). The LED output is provided through a 270R resistor (R1), providing approx. 12mA.

See Also