Difference between revisions of "RaspberryPi Boards"

From Lo-tech Wiki
Jump to navigation Jump to search
Lo-tech>James
(Added VGA Adapter)
 
m (1 revision imported)
(No difference)

Revision as of 11:11, 21 April 2021

Lo-tech boards designed for use with the Raspberry Pi hardware.

Note that Lo-tech boards are designed independently of, and in no way endorsed by, the Raspberry Pi Foundation. 'Raspberry Pi' is a trademark of the Raspberry Pi Foundation.

GPIO Interface Board

The Lo-tech GPIO Interface Board is a general-purchase, GPIO interface for use with the RaspberryPi Model A+, B+ and 2B single-board computers. The boards follow the dimensions of the Rapsberry Pi HAT specification.

  • The First Revision provides:
    • 4x opto-isolated inputs
    • 4x TTL outputs
    • 4x LED outputs
  • The Second Revision provides:
    • 4x opto-isolated inputs
    • 8x open-collector outputs (up to 30V/200mA)
    • Maxim 1-wire bus connection
    • Fused 5V power header (for powering the Raspberry Pi)

24-bit VGA Adapter

The Lo-tech RPi VGA Adapter PCB provides a secondary display option for Raspberry Pi SBCs equiped with the 40-pin GPIO header. The boards follow the dimensions of the Rapsberry Pi HAT specification and is natively supported in Raspbian Jessie via the dpi24.dtb overlay - no drivers are required.

See Also